Kick Stick Motorcycle Lift Stand

1. Remove the safety / lock pin from the pin hole.

2.   Raise the handle to the upright position and place the safety / lock pin back in the pin hole.
      This will lock the handle into the lifting position.
      You are ready to lift your motorcycle.

3. Select a level, hard surface (ie, concrete) to lift your motorcycle.

To lift the front wheel of your bike, slide the Kick Stick underneath your motorcycle with the padded cross bar slightly forward of the center of the bike.
The handle should be in the upright position perpendicular to the floor. When the
Kick Stick contacts the frame the bike is stable. Push the handle down to the floor.
This will raise the front wheel of your bike.

To lift the rear wheel of your bike, slide the Kick Stick underneath your motorcycle with the padded cross bar slightly behind the center of the bike. The handle should be in the upright position perpendicular to the floor. When the Kick Stick contacts the frame the bike is stable. Push the handle down to the floor ( Use your body weight instead of relying on your strength.)
This will raise the rear wheel of your bike.

Lowering your motorcycle

upright position by holding onto the left handle grip.

2. Secure your motorcycle on its kickstand and slide the Kick Stick from underneath bike.

Kick Stick Motorcycle Lift and Stand
PO Box 791
Conway, South Carolina 29526
Telephone: (843) 333-6635
Fax: (843) 365-1679